Special product

Description

Usage Areas;

It is used as a leveling paste and as an adhesive in the restoration of concrete, natural stone, aerated concrete, brick, ceramics, historical buildings, filling corners, cracks, dilatation holes, walls, ceilings, vertical surfaces where chemical resistance is required.

Application Details

The HayperFlex CARBON XP Spatula is applied to the material to be adhered and to the concrete surface and adhered. In the bonding of the carbon plate, after the resin applied to the plate pulls itself for a while, it is manually adhered on the resin applied concrete surface without leaving any air gap. While doing this, it is passed over the plate with a roller or a roller. The part of the underlying epoxy resin that comes out of the carbon fiber should be cleaned. If it is desired to plaster on the finished application, HAYPER EPOXY PRIMER-SF epoxy primer is applied to the finished surface and the dry silica sand is sprinkled and the surface is made suitable for plaster application.

Application Prohibitions

The application surface should be cleared of weakly adhered parts, cleaned of dust, oil, tar, bitumen, paint, silicone, curing agent, detergent and mold oils and should be rough to increase adhesion. If repairs are required on the surface, it should be repaired with the appropriate HAYPERFLEX repair mortar. If the application ground is concrete, it must be cured (28 days) and have a minimum pressure of 25 N / mm2 and a tensile strength of 1.5 N / mm2. The humidity of the floor concrete should be at most 4% and the floor temperature should be at least 3 ° C above the dew point.