Специальный продукт

single-img-twenty
PU FOAM INJECTION

It is a two-component, acrylic bitumen based liquid membrane that is reinforced with elasticizing additives. The dry film of the product adheres perfectly to the surface on which it is applied and forms an elastic layer resistant to water and moisture.

  • Категория : Специальный продукт

Description

Usage Areas;

inside waterproofing cracks, insulation of moving cracks , Insulation of cold joints , In water tanks and swimming pools inside tunnel and underground tanks ,  Used for internal insulation of basements. Suitable for concrete, stone and solid bricks.

Application Details

Components A and B are mixed with a low speed mixer (below 400 rpm) and mixer tip until homogenous. The mixture should be stirred slowly and drained of moist air into the mixture to ensure that the reaction does not start before contact with water. The prepared mixture should be applied without waiting. Only prepare a sufficient quantity of the mixture. Do not apply at temperatures below +50 ° C. Pot life of polyurethane based products is limited. Especially in hot environments, the mixture should be used immediately. Mixing should not be done other than the specified mixing ratio.

Application Prohibitions

Avoid application in temperatures below +5°C and above +35°C.

Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.
 

Связаться с нами